Steelwork specifications

• Built in excess of the Canal Boatbuilders Association code of practice.
• Fully compliant to the Recreational Craft Directive.
• 10mm bottom plate, 6mm hull sides, 5mm cabin sides and 4mm cabin top
• Fabricated steel aft doors
• Side doors and top hatch (if required)
• Angled reinforcements to the hull, box section roof supports
• Stainless Steel water tanks (approx. 150 gallons)
• Fuel tank (approx. 50 gallons)
• Quick release weed hatch
• Rubbing strakes welded top and bottom
• Sealed gas locker with overboard drain
• Self draining Bow and stern cockpits
• ‘T’ bar mooring posts fwd and "dollies" or T bars aft, centre mooring line eye and anchor fixing point.
• Bow, stern and side fender fixing points
• Magnesium Anodes to suit length
• Fully primed inside and out with Zinc Phosphate primer and Coal Tar pitchblacking.